- Avrdude Stk500_recv() Programmer Is Not Responding
- Avrdude: Stk500_recv(): Programmer Is Not Responding Nano
- Avrdude: Stk500_recv(): Programmer Is Not Responding Avrdude: Stk500_getsync()
- Avrdude: Stk500_recv(): Programmer Is Not Responding Arduino Uno
Hi forum:
Mar 22, 2016 如果你的IDE出现avrdude: stk500recv: programmer is not responding的提示的时候，注意看看你的数字0和数字1是不是插着东西。如果你将数码管接到了数字0和数字1上，每次上传代码时，都要拔下来才行。.
I would like to share with you a problem I am having. I am using the Arduino Nano v3.0, ATMega328P. I have just written my program and the program was fine. But when it was uploading it gave this message:
Arduino: 1.8.8 (Mac OS X), Board: “Arduino Nano, ATmega328P”
Sketch uses 1810 bytes (5%) of program storage space. Maximum is 30720 bytes.
Global variables use 184 bytes (8%) of dynamic memory, leaving 1864 bytes for local variables. Maximum is 2048 bytes.
/Applications/Arduino.app/Contents/Java/hardware/tools/avr/bin/avrdude -C/Applications/Arduino.app/Contents/Java/hardware/tools/avr/etc/avrdude.conf -v -patmega328p -carduino -P/dev/cu.usbserial-1420 -b115200 -D -Uflash:w:/var/folders/86/prt1t3bs51z518qf01myn6_w0000gp/T/arduino_build_829922/jan01.ino.hex:i
- Avrdude: stk500recv: programmer is not responding. I have enabled /dev/ttyUSB0 under menu Tools → Serial Port. I have also selected the correct board (Duemilanove with ATmega328) from the list. Yet, I am not able to resolve the issue. I have searched online as well and none of the other responses for this problem seem to be working for me.
- Jul 10, 2020 arduino nano 报错：avrdude: stk500recv: programmer is not responding（已解决）文章目录arduino nano 报错：avrdude: stk500recv: programmer is not responding（已解决）前言：解决方案：前言：好久没用arduino了，我竟然卡在烧录blink上一整天时间！.
- 'avrdude: stk500recv: programmer is not responding' on brand, Topic: 'avrdude: stk500recv: programmer is not responding' on brand new Arduino Nano (Read 20257 times) previous topic - next topic Thanks, switching to ATmega328P (Old Bootloader) had helped me to solve stk500recv: programmer is not responding stk500getsync attempt 1 of.
avrdude: Version 6.3-20171130
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2014 Joerg Wunsch
System wide configuration file is “/Applications/Arduino.app/Contents/Java/hardware/tools/avr/etc/avrdude.conf”
User configuration file is “/Users/jayden/.avrduderc”
User configuration file does not exist or is not a regular file, skipping
Using Port : /dev/cu.usbserial-1420
Using Programmer : arduino
Overriding Baud Rate : 115200
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x00
avrdude done. Thank you.
Problem uploading to board. See http://www.arduino.cc/en/Guide/Troubleshooting#upload for suggestions.
This report would have more information with
“Show verbose output during compilation”
option enabled in File → Preferences.
As the error message says, I am using MacOS Mojave, version 10.14.2. My Arduino IDE version is 1.8.8 and I just downloaded it yesterday because my old one isn’t working.
Every time I upload to this board, there is a problem. The exact same one. Note that that isn’t true for my Arduino Uno.
Also, when I try to load board information, Nano says “Unknown board” while Uno says “Arduino/Genuino Uno”. All these information is attached. My verbose output is “upload”. Do I need to use compilation? Again, the screenshot is also attached.
Please help and a happy new year.
Hi,I have a EtherTen board, and I am attempting to load the dmd_demo example sketch from the DMD package.
I have tried both Arduino 1.5.7 and the latest nightly (2014-08-31). This is on OSX 10.9.4. For Arduino 1.5.7, I had to use the old Java 6 package, as the Java 7 package doesn't work with OSX 10.9 (https://github.com/arduino/Arduino/issues/2178).
When I go to File, then Upload, I get the following output:
However, I am able to successfully upload the blink sketch successfully:
Code: Select all
When I try to upload the countdown example sketch from DMD2, I also get a similar error:When I try to upload ScrollingAlphabet example from DMD2, I get:
Avrdude Stk500_recv() Programmer Is Not Responding
Code: Select all
Any thoughts on what's going on?